|
|
|
|
Step 2 of 5
Provide Measurements
|
|
|
To provide the information on a cut corner, it may be necessary to verify the accuracy
of that information.
-
First, extend two imaginary lines to a point where the sides would have met had the
corner been square.
-
Check the distance from the inflexion of the cut corner (point X) to the imaginary
(point Y).
-
Now check this measurement against our cut corner measurementment verification chart
below:
Please note: If you add the measurement you obtained (X to Y) twice to the
measurement D, you should equal measurement A.
|
Dimension To the Square (X-Y)
|
Cut Corner Measurement
|
Dimension To the Square (X-Y)
|
Cut Corner Measurement
|
|
|
4-1/4"
|
6"
|
11-1/4"
|
16"
|
|
5"
|
7"
|
12"
|
17"
|
|
5-5/8"
|
8"
|
12-3/4"
|
18"
|
|
6-3/8"
|
9"
|
13-1/2"
|
19"
|
|
7"
|
10"
|
14-1/4"
|
20"
|
|
7-3/4"
|
11"
|
14-7/8"
|
21"
|
|
8-1/2"
|
12"
|
15-1/2"
|
22"
|
|
9-1/8"
|
13"
|
16-1/4"
|
23"
|
|
9-7/8"
|
14"
|
17"
|
24"
|
|
10-5/8"
|
15"
|
|
|
|
Measuring Tips:Please be as accurate as possible when submitting your measurements, to ensure the proper fit of your new Spa Cover. If you have any questions or need assistance, give us a call at 1-800-983-7665.
-
You may either measure your old Spa Cover, or the Spa itself
- All measurements must be submitted in inches
- Round up to the nearest inch unless your Spa is located inside a structure (such as a gazebo)
- Never round up to the nearest foot
- If measuring the Spa itself, all measurements should be taken from the outside edge of the Spa (including the cabinet, where applicable)
- Your Spa Cover will be manufactured to a tolerance of +/- 1/2" of the measurements you provide
- Submitting your measurements provides you with a fast & easy Price Quote on a new custom Spa Cover; it does NOT constitute an order. No order will be processed until you add a specific Spa Cover to your shopping cart.
|
|